Wheel profile measuring device OPTIMESS WP

The new Optimess WP wheel profile sensor makes it possible to measure wheel profile and wheel diameter with the highest accuracy in a short time. The wheel profile is scanned contact-free by laser and the various profile parameters are automatically calculated and displayed.

The measurement procedure, wheel and train types can be freely configured, and the measurement is then carried out fully automatically via one-button operation.

Applications
Software
Technical data
Options

Characteristics

  • Highest precision (±25μm)
  • Fast measurement of wheel profile and diameter (<5s)
  • Wireless communication between sensor and tablet
  • Measurement under difficult spatial conditions
  • Safe operation, no need to reach with the hand between wheel and rail
  • Simple, intuitive operator guidance
  • Online profile comparison
  • Free configuration of wheel and train types, unlimited number
  • Data export in various formats (Excel, CSV, XML)
  • User management
  • Unicode support (UTF-8)
  • Multilingual (DE, EN, FR, CHIN)
  • Up to 700 measurements per full battery charge
  • Short battery charging time (<1h)

Application

Software

The measurement programme allows the simple recording of individual wheels, axles or entire trains. The profile is displayed online during the measurement.

The desired profile values are already available at the end of the measurement and are displayed in colour according to the previously defined tolerances. This allows a simple check immediately after the measurement. The acquisition of a train is graphically guided by the programme so that one press of a button is sufficient to trigger the next measurement.

The programme runs on Windows 7 or higher. There are various Windows 10 tablet solutions to choose from for recording.

Basic types

Basic types

Type OMS 15037
60 (9-96) mm
Type OMS 15037
5 µm
Type OMS 15037
±25 µm
Type OMS 15037
160 mm
Type OMS 15037
1 µm
Type OMS 15037
± 2 µm
Type OMS 15037
±10 µm
Type OMS 15037
> 500 Measurementss
Type OMS 15037
-15 to 50°C

Technical data

Options

  • Equivalent conicity

    Software module for calculating the equivalent conicity according to DIN EN 15302 or UIC 519. Rail profile, inclination and distance can be freely selected and stored as track type.  Calculation, display and tolerance monitoring are carried out online.

  • Measurement module wheel back distance Ar

    An electronic measuring tape is used to record the internal distance between the two flat surfaces of the wheels. The compact measuring module is integrated in the wheel profile sensor.

«The wheel profile is scanned contact-free by laser and the various profile parameters are automatically calculated and displayed.»

Download Flyer

ELAG Elektronik AG

Switzerland

Stegackerstrasse 14
CH-8409 Winterthur

Tel +41 52 577 50 77
Fax +41 52 235 15 59

China

Rm315
JinShangYuan
Building 20, Xinyuanli Xi
Chaoyang District
Beijing, 100027

Tel +86 10 64343566
Tel 400 068 2068 (China only)

France

Bureau de liaison France
11, rue du Mittlerweg
68025 Colmar

Mob +33 (0)6 63 88 77 55
Tel +33 (0)3 89 20 63 34